Canon Pixma Chip Resetter

  • Chip Resetter for Canon CLI-8 and PGI-5 inkjet printer cartridges will reset genuine OEM Canon CLI-8 and Canon PGI-5 cartridge chips to 'new' specification, allowing your printer to recognize the cartridge as new when you refill it. Resetter for Canon CLI-8 and PGI-5 ink cartridge will yield thousands of successful resets and is battery powered.
  • Canon inkjet printer cartridges contain a chip that tracks ink use but doesn't monitor print levels. Refilling inkjet cartridges or using a continuous ink system is an economical solution for many consumers. However, the cartridge chip or the ink counter on the printer may need to be reset periodically. Cartridge resetters are available from many refill ink suppliers; the ink waste counter on Canon printers can also.
  • All Canon Resetters available for free download (also called canon service tool) are listed below. They are used to reset the waste ink counter on the canon printers but not to reset chip in the printer. Please note, before a reset using this software resetter your canon printer must be reset manually. The manual reset.
Canon Maxify MB Series CIS Brackets

You will need a CR58 chip resetter from - to reset the cartridge ink levels (chips). Canon Pixma IP 3300, IP3500, IP4200, IP4300, IP4500, IP5200. Canon A-1 Camera, Zoom Lens, HMC Filter, Skylight 72mm filter. $175 (Flushing) pic hide this posting restore restore this posting.

Canon TS Series CIS Brackets
Canon PGI-1200 CIS Cartridge Replacement with Chip
Canon PGI-2200 CIS Replacement Cartridge With Chip
CIS Replacement Cartridges PGI 250, CLI 251 Sold By Color Or Set
CIS Replacement Cartridges PGI 280, CLI 281 Sold By Color Or Set
CIS Replacement Cartridges PGI 270, CLI 271 Sold By Color Or Set
Canon Storage Clips For 245, 246, 211, 210 Cartridges 4 Pack
Canon Storage Clips For 941-940 Cartridges 4 Pack
Canon pixma pro-100 chip resetter
Snap & Vac Tool For Canon Cartridge Number CL 211, PG-210, CL 246, PG 245
Replacement CIS CLI-42 Empty Cartridge For Canon Pro 100 Ink Tank system
Refill Clips For Canon CLI-251,271 PGI-250,270, PGI-280, CLI-281 Cartridges Set Of 5
Refill Clips For Canon CLI-251,271 PGI-250,270, PGI-280, CLI-281 Cartridges Set Of 6
Refill Clips For Canon CLI-42 Cartridges Set Of 8

Howdy teachers and forumers! Previously, we have released our helpful and working tutorial on How to Manually Reset Epson Printers Without Using Any Software. To our surprise, many have also requested for the same tutorial about Canon printers. We don’t want to disappoint our readers that’s why as promised and due to popular demand, here is our tutorial on how to manually reset Canon printers without using any software.


  • You will see a message that says Waste ink pad is full or something like that.

As we have said the last time, this tutorial will literally save you a couple hundred bucks. This type of reset method is also called a hard reset. It has been tried and tested on the following Canon printer models:

  • Canon MX870
  • Canon MG5430
  • Canon Pixma MG6620
  • Canon Pixma MP495
  • Canon MG2440.
  • Canon MX439
  • Canon MX925
  • Canon MP560
  • Canon MG2550
  • Canon iX6820
  • Canon MP150

How to Manually Reset Canon Printers Without Using Any Software

STEP 1: Make sure that your printer is turned on.

STEP 2: Press the power button (this will turn off/switch off your printer)

STEP 3:Once turned off, press on STOP button for two (2) seconds.

STEP 4:While holding on to the STOP button, press the power button at the same time for two (2) seconds and release the STOP button.

STEP 5: After letting go of the STOP button (while you are still pressing the power button), press the STOP button five (5) times.

STEP 6: Immediately after pressing the STOP button for five (5) times, release the power button.

That’s it! You’re done! Your Canon printer will now go on reset mode. The LCD screen on printer should go blank. Your printer will start making a couple of noises but it’s normal. Once the printer stopped making noises, just press on the power button. This will turn off or restart your printer.

Canon Pixma Pro-100 Chip Resetter

If in case your printer asks for a new driver, just reinstall your Canon printer’s driver.

Thank you for following my tutorial. If you find this helpful , please share it with your friends on social media. Thank you so much! Also, please support us by following DepEd Forum on Facebook and Twitter. Thank you so much!

Reset Canon Ink Cartridge Chip